When water comes out slowly from a faucet or shower, it can feel annoying. Washing dishes, taking a shower, or filling a glass of water takes longer than it should. Many people face this issue. But what causes it?
As a trusted plumber Charleston, we solve these problems daily. There are a few main reasons why water pressure drops—most of them can be fixed. We also check every part of your plumbing system to determine exactly what’s wrong. So, that way, we fix the real cause, not just the symptoms.
Call a Plumber for Old or Corroded Pipes
Sometimes, pipes inside the walls get rusty. This happens more often in older homes. When rust builds up, it blocks the water and makes it move slowly. Even a small amount of rust can make a big difference in water flow.
Also, we often see pipes made of old metal, like galvanized steel, that rust faster. When this happens, we remove the old pipe and put in new ones made from materials that don’t rust easily.
After replacing them, the water starts flowing better again. This is one of the most common problems we repair. We always check your pipes closely before making any changes.
Water Heater Problems
When the hot water is weak but the cold water flows well, it usually means the water heater has a problem. One common cause is sediment. Sediment is tiny particles that settle at the bottom of the tank over time. These particles can block the flow of hot water.
We also check inside the heater and remove the sediment if needed. However, sometimes the parts inside the heater wear out. So, if that happens, we suggest a new water heater installation Charleston. We always explain what’s wrong and what’s best to do next, so you’re never confused about the repair.
Incorrect Water Heater Size or Installation
A water heater must be the right size for your home. If it’s too small, the pressure drops when two or more people use water simultaneously. This often happens in growing families or busy households.
Also, if the heater was installed incorrectly, it can affect the water flow. Moreover, pipes may be in the wrong place, or connections may not fit well.
Therefore, we offer expert water heater installation Charleston. We help you choose the right size and install everything correctly so you never run out of hot water or deal with low pressure again.
Leaks Hidden in the Plumbing System
Some leaks are hard to find. Water might drip behind walls, under floors, or even underground. Even though you can’t see the leak, it lowers your water pressure. You might also notice higher water bills or damp spots.
We also use special tools to find these leaks fast. Once we find the leak, we repair the pipe and restore normal pressure. These types of problems are tricky, but we always solve them. As a skilled plumber Charleston, we handle hidden leaks carefully and repair them before they cause more damage.
Clogged Fixtures or Aerators
Water faucets and showerheads have small screens called aerators. These can also get blocked by dirt, minerals, or tiny particles. When this happens, water can’t flow out easily.
We clean or change these parts quickly. But sometimes, the problem is deeper. If we notice signs of water damage around the clogged area, there might be a leak behind the wall or under the sink.
Often, people search “water damage repair contractor near me”, but in many cases, a plumbing fix is needed. So, that’s where we come in—to fix the source of the problem, not just the result of it.
Municipal Supply Issues or Shared Lines
Sometimes the problem isn’t inside your house at all. If your home shares a water line with your neighbors, their usage can affect your water pressure. Or, the city’s main water line might also be under repair.
Still, if you’re the only one having issues, we’ll check your shut-off valve, water meter, and outside supply line. A small clog in these places can also make a big difference in water flow. As an experienced plumber Charleston, we investigate every part of the system—inside and out—to ensure nothing is missed.
Quick Reference: Common Causes and Fixes
To make everything easier to understand, here’s a simple table showing what causes low water pressure and how we fix each one:
| Problem | What Causes It | How We Fix It |
|---|---|---|
| Rusty or Old Pipes | Rust builds up and blocks the flow | Replace with new, rust-free pipes |
| Broken Pressure Regulator | The device stops working correctly | Test and replace if needed |
| Dirty Water Heater | Sediment blocks the hot water lines | Clean or flush the tank |
| Small or Wrong Heater | The heater is too small for your family | Install a proper-sized heater |
| Hidden Leaks | Water leaking inside the walls or floors | Find and repair the leak |
| Clogged Fixtures | Blocked faucet screens or showerheads | Clean or replace them |
| Outside Line Issues | City water problems or shared lines | Check all outside connections and valves |
Looking Ahead with Smarter Plumbing
Low water pressure is more than just an inconvenience. It can mean bigger plumbing problems are starting. Therefore, we fix the cause, not just the symptom.
Whether it’s replacing pipes, flushing a heater, or fixing a hidden leak, we make sure everything flows like it should. So, you can count on us if you’re dealing with low pressure.
As a reliable plumber Charleston, we repair what’s broken and install what’s needed. We also offer water heater installation families depend on, so your hot water works right every time.
At Adkins Plumbing & Contracting LLC, we repair, replace, and install the systems your home depends on. We also find leaks, improve water flow, and maintain water pressure.
